Types of Low-Speed and High-Speed Agitators

In one of our articles we described the characteristics of industrial stainless steel mixers. In this guide we would like to expand on that subject by outlining the main types of agitators. Each agitator has its own specific features and can be used for different production applications in industry. We will focus on propeller agitators, frame, spiral-frame, anchor and homogenizing agitators, as well as agitators for special applications.


Contents

  1. Types of low-speed and high-speed agitators
  2. Propeller agitators
  3. Frame agitator
  4. Spiral-frame agitator
  5. Anchor agitator (with scrapers)
  6. Homogenizing agitator
  7. Agitators for special applications

Propeller agitators

Propeller agitators are one type of high-speed equipment. They are used in mixing processes, homogenization, inducing circulation and creating strong currents in tanks containing viscous solutions (emulsions, suspensions) and aqueous mixtures. Using a propeller agitator prevents sludge and biological process sediment from solidifying, and prevents „dead zones” forming in the chambers and channels of the process line. Because of their design, they are most often mounted vertically or at an angle on the top head or in the bottom head. They are widely used in fermentation and treatment processes.

Frame agitator

Another type of equipment is the frame agitator. It belongs to the group of low-speed equipment, and its purpose is to prevent unnecessary aeration of the product. Frame agitators are usually mounted on a special flange welded into the top head. This allows slow, steady mixing of products with increased viscosity and density. Equipment of this type is most often used in the food industry or in industrial applications (syrups, oils, cosmetics).

Spiral-frame agitator

Spiral-frame agitators also belong to the group of low-speed equipment. Their purpose is similar to that of frame agitators. The main difference is that they are fitted with additional spirals that force the medium to circulate. As a result, they can successfully handle products of exceptionally high viscosity and density.

Anchor agitator (with scrapers)

In design and operation, an anchor agitator is similar to a frame agitator, but it works mainly in the lower part of the mixer. Important components of this equipment are scrapers made of polymer materials such as PTFE. The specialized scraper design prevents product from building up on the tank wall. As a result, the anchor agitator prevents local overheating when a heating jacket is used, as well as the formation of burnt-on deposits and sediment on the bottom of the vessel.

Homogenizing agitator

Alongside propeller, turbine and disc agitators, homogenizing agitators are also classed as high-speed agitators. Equipment of this type is suitable for any process that requires a high degree of product homogeneity, for example when combining liquids with powders that are difficult to disperse and mix.

Homogenizing agitators are widely used in the production of creams, ointments, lotions, pomades, gels, sauces and flavour emulsions.

The production process itself is made possible by an agitator mounted at the bottom of the tank. The homogenizer works on the rotor/stator principle. In this case the fixed part – the stator – and the moving part – the rotor – are mounted on a single shaft. The rotation of the rotor first breaks up and ultimately homogenizes the solutions used.

Agitators for special applications

Depending on the process and the investor’s needs, an agitator for special applications may be required. These are made-to-order units that use the patented solutions and properties of other agitator types, such as frame or propeller agitators. To design and configure the right solution, we encourage you to contact Pstrągowski!

Let's talk about your production

Tell us what you need – we will select the right solution and present the options.

Contact us