What Is a Fermenter?
Brewing beer
Brewing beer is a process that some people call a true art, and not without reason. After all, it requires extensive knowledge, experience and skill. Choosing the right parameters when brewing is essential if the whole process is not to fall flat and you are to end up with a tasty, golden drink rather than an undrinkable liquid. Obviously, in addition to that knowledge and skill, a good brewer must have the right equipment in their arsenal. One of the most important pieces of equipment, the “heart” of every brewery, is the fermenter.
A fermenter, also called a fermentation vessel, fermentation tank or unitank, is the tank in which the beer fermentation process takes place.
What is fermentation?
Fermentation is a key process in beer production. Carrying it out properly determines whether the beer achieves the right chemical parameters and flavour. The following factors need to be carefully controlled:
- the number of yeast cells pitched
- the choice of a suitable yeast strain
- temperature
- oxygenation
- a suitable fermentation environment
Naturally, the choice of a suitable fermentation tank is also important. The build quality of a fermenter has a significant effect on the taste of the beer produced in it.
Crucially, a good fermentation tank must be highly resistant to the fermentation processes taking place inside it.
To achieve this, it must be manufactured from suitable, top-quality materials and components. Otherwise, undesirable and harmful substances may get into the beer being brewed, which could mean a real disaster – not only the loss of many litres of beer, but also a considerable loss of time and money.
How is a fermenter built and what is it made of?
Fermentation tanks are usually made of high-grade stainless steel. This material ensures hygiene and prevents undesirable chemical reactions between the beer and the tank, thereby guaranteeing the high quality of the finished beer. What is more, using stainless steel ensures that the tank is properly leak-tight and stable and resistant to corrosion, and it eliminates the need for complicated care and maintenance procedures.
The exterior of a fermentation tank
As for the shape of the fermenter, it is usually cylindrical with a conical bottom. The angle of the cone wall should be between 45° and 60°, and ideally between 52.5° and 60°, because yeast and other sediment will then settle at the very bottom of the tank.
The lower part of the tank has pipe outlets for connecting hoses. One outlet (the lowest) is used to empty the entire unitank; slightly higher up is the racking (sediment) port, which allows liquid to be drawn off just above the sediment level.
In the middle section of a stainless steel fermenter there is an oval manway. It is used to inspect the inside of the tank and also to add hops, yeast and other additions. Anything can be added through this manway only when the liquid level is below its rim.
Right next to the manway are the sight glass and the measuring rod. The sight glass is a vertical glass tube which, on the principle of communicating vessels, shows the liquid level in the fermentation tank. The measuring rod is a metal ruler which, used together with the tank volume table, allows you to determine the amount of liquid inside the tank.
Polish law does not permit the use of measuring rods longer than 2 m, which is why several measuring rods are used on larger fermentation tanks.
At this operating level, a good-quality fermenter should also have a pressure gauge to measure the internal pressure. Right next to it is a pipe outlet with a (ball) valve used to release or admit CO2 manually, together with an automatic pressure-regulating valve which, once set, releases CO2 whenever the pressure exceeds a specified level.
In the upper part of the fermentation tank you will find very large-diameter (butterfly) valves that allow additions to be introduced without opening the manway. A smaller tank of about 25 litres (a hop dosing system) is screwed onto such a valve; the additions are poured into it and it is then sealed tightly. After the pressure in this small tank has been equalized with the pressure in the main tank, its contents can be added safely. The dome also has safety valves providing protection against overpressure and vacuum.
Internal components of the tank
Compared with the outside of the tank, there are far fewer components on the inside. The fewer components, the better, because it is easier to maintain hygiene.
In the lower part there is a pipe extending into the tank, through which the beer is pumped out. At the centre of the dome there is a spray head used to clean the tank. Cleaning is carried out with an alkaline and an acid solution. The solution is pumped into the spray head. The pump generates very high pressure, which causes the solution to be sprayed with great force onto the walls and roof of the tank. Cleaning a single tank, including rinsing, takes about two hours. The dome also houses the butterfly valve port and the connections for the safety valves.
In the tank wall there is an inlet through which the beer is mixed when a hop gun is connected (a device for hopping beer after fermentation). It should curve sideways and upwards, as this improves the circulation of the beer. The last, but very important, components are the temperature probes, which should be positioned at least 15 centimetres from the wall. For smaller tanks one probe is sufficient, but tanks with a capacity of more than 50 hl should have at least two. The larger the tank, the more beneficial it is to have more temperature probes.
Choosing the right fermenter
The choice of fermentation tank should always be based on the requirements and needs of the brewery in question.
The best option is to buy a custom-designed fermenter, built by a manufacturer who takes into account all the aspects and parameters specified by the customer. In this way the brewery receives exactly the fermenter it needs to meet every brewing challenge without disrupting beer production.
The key parameter is the capacity of the fermentation tank.
It must match the brewery’s “processing capacity”. While small, local breweries should find fermentation tanks with a capacity of up to several hundred hectolitres sufficient, larger fermenters with a capacity of several thousand hectolitres are ideal for bigger companies.
The choice of additional fermenter equipment is also important. Depending on the type of beer produced, a heating and cooling system or a pressure regulation function, for example, may prove useful.
The fermentation tank itself is not everything – suitable fittings are also essential, i.e. sensors, connections and other necessary accessories, without which the fermenter will not reach its full potential. What is more, the fermenter must be installed correctly – by a qualified installer.
Tell us what you need – we will select the right solution and present the options.
Contact us